Omniprobe AutoProbe tungsten tips Quantifoil 7mm diameter on one side

7mm diameter on one side and square on the other side

Be careful not to spill reagents during this process

Primarily designed for accurate Z-axis calibration the standards also offer X- and Y-axis calibration for bigger scanners in the 40-100µm range

2 stub adapter to M4

90° AFM sample mount with spring clip to conveniently mount thin cross section sample

Omniprobe AutoProbe tungsten tips Quantifoil 7mm diameter on one sideCustom probe tips design for the AutoProbe 100 and 200, 300 and 400 and 250 and 200 systems. GF341: AutoProbe 100 and 200 systems. Nickel tube shank with a diameter of 0. 508mm and a tungsten tip with a diameter of 76m. Tip radius is 0. 5m with a 13 taper angle for maximum lifetime. Nickel shank ~33. 25mm long. Tungsten tip ~35. 5mm with the tungsten whisker starting 2. 3mm from the tip. GF342: AutoProbe 100 and 200 systems. All tungsten design with a